The continued scaling of flash memory technology into smaller process nodes, combined with the increased information capacity of each flash cell (i.e, storing more bits per cell), has placed NAND flash memory at the forefront of modern storage technology.

Recent years have witnessed a significant increase in the storage density of NAND flash memory, making it a critical component in modern electronic devices. However, with the rise in storage capacity comes an increased likelihood of errors in data storage and retrieval. The growing number of errors poses ongoing challenges for system designers and engineers, in terms of the characterization, modeling, and optimization of NAND-based systems. We present a novel approach for modeling and preventing errors by utilizing the capabilities of generative and unsupervised machine learning methods. As part of our research, we constructed and trained a neural modulator that translates information bits into programming operations on each memory cell in NAND devices. Our modulator, tailored explicitly for flash memory channels, provides a smart writing scheme that reduces programming errors as well as compensates for data degradation over time. Specifically, the modulator is based on an auto-encoder architecture with an additional channel model embedded between the encoder and the decoder. A conditional generative adversarial network (cGAN) was used to construct the channel model. Optimized for the end-of-life work-point, the learned memory system outperforms the prior art by up to 56\% in raw bit error rate (RBER) and extends the lifetime of the flash memory block by up to 25\%.

The crowdsourcer then collects and analyzes the results collectively to address the purpose of the project. The worker's pay is often

The advent of artificial intelligence (AI)-native wireless communication is fundamentally reshaping the design paradigm of next-generation (NextG) systems, where intelligent air interfaces are expected to operate adaptively and efficiently in highly dynamic environments. Conventional orthogonal frequency division multiplexing (OFDM) systems rely heavily on pilots and the cyclic prefix (CP), resulting in significant overhead and reduced spectral efficiency. To address these limitations, we propose an adaptive end-to-end (E2E) transceiver architecture tailored for pilot-free and CP-free wireless systems. The architecture combines AI-driven constellation shaping and a neural receiver through joint training. To enhance robustness against mismatched or time-varying channel conditions, we introduce a lightweight channel adapter (CA) module, which enables rapid adaptation with minimal computational overhead by updating only the CA parameters. Additionally, we present a framework that is scalable to multiple modulation orders within a unified model, significantly reducing model storage requirements. Moreover, to tackle the high peak-to-average power ratio (PAPR) inherent to OFDM, we incorporate constrained E2E training, achieving compliance with PAPR targets without additional transmission overhead. Extensive simulations demonstrate that the proposed framework delivers superior bit error rate (BER), throughput, and resilience across diverse channel scenarios, highlighting its potential for AI-native NextG.

Abstract--We present AttDet, a Transformer-inspired MIMO (Multiple Input Multiple Output) detection method that treats each transmit layer as a token and learns inter-stream interference via a lightweight self-attention mechanism. Queries and keys are derived directly from the estimated channel matrix, so attention scores quantify channel correlation. V alues are initialized by matched-filter outputs and iteratively refined. The AttDet design combines model-based interpretability with data-driven flexibility. We demonstrate through link-level simulations under realistic 5G channel models and high-order, mixed QAM modulation and coding schemes, that AttDet can approach near-optimal BER/BLER (Bit Error Rate/Block Error Rate) performance while maintaining predictable, polynomial complexity.

Channel state information (CSI) prediction is a promising strategy for ensuring reliable and efficient operation of massive multiple-input multiple-output (mMIMO) systems by providing timely downlink (DL) CSI. While deep learning-based methods have advanced beyond conventional model-driven and statistical approaches, they remain limited in robustness to practical non-Gaussian noise, generalization across diverse channel conditions, and computational efficiency. This paper introduces CSI-4CAST, a hybrid deep learning architecture that integrates 4 key components, i.e., Convolutional neural network residuals, Adaptive correction layers, ShuffleNet blocks, and Transformers, to efficiently capture both local and long-range dependencies in CSI prediction. To enable rigorous evaluation, this work further presents a comprehensive benchmark, CSI-RRG for Regular, Robustness and Generalization testing, which includes more than 300,000 samples across 3,060 realistic scenarios for both TDD and FDD systems. The dataset spans multiple channel models, a wide range of delay spreads and user velocities, and diverse noise types and intensity degrees. Experimental results show that CSI-4CAST achieves superior prediction accuracy with substantially lower computational cost, outperforming baselines in 88.9% of TDD scenarios and 43.8% of FDD scenario, the best performance among all evaluated models, while reducing FLOPs by 5x and 3x compared to LLM4CP, the strongest baseline. In addition, evaluation over CSI-RRG provides valuable insights into how different channel factors affect the performance and generalization capability of deep learning models. Both the dataset (https://huggingface.co/CSI-4CAST) and evaluation protocols (https://github.com/AI4OPT/CSI-4CAST) are publicly released to establish a standardized benchmark and to encourage further research on robust and efficient CSI prediction.

In this work, we address the problem of training Reinforcement Learning (RL) agents over communication networks. The RL paradigm requires the agent to instantaneously perceive the state evolution to infer the effects of its actions on the environment. This is impossible if the agent receives state updates over lossy or delayed wireless systems and thus operates with partial and intermittent information. In recent years, numerous frameworks have been proposed to manage RL with imperfect feedback; however, they often offer specific solutions with a substantial computational burden. To address these limits, we propose a novel architecture, named Homomorphic Robust Remote Reinforcement Learning (HR3L), that enables the training of remote RL agents exchanging observations across a non-ideal wireless channel. HR3L considers two units: the transmitter, which encodes meaningful representations of the environment, and the receiver, which decodes these messages and performs actions to maximize a reward signal. Importantly, HR3L does not require the exchange of gradient information across the wireless channel, allowing for quicker training and a lower communication overhead than state-of-the-art solutions. Experimental results demonstrate that HR3L significantly outperforms baseline methods in terms of sample efficiency and adapts to different communication scenarios, including packet losses, delayed transmissions, and capacity limitations.

Synchronization errors, such as insertions and deletions, present a fundamental challenge in DNA-based data storage systems, arising from both synthesis and sequencing noise. These channels are often modeled as insertion-deletion-substitution (IDS) channels, for which designing maximum-likelihood decoders is computationally expensive. In this work, we propose a data-driven approach based on neural polar decoders (NPDs) to design low-complexity decoders for channels with synchronization errors. The proposed architecture enables decoding over IDS channels with reduced complexity $O(AN log N )$, where $A$ is a tunable parameter independent of the channel. NPDs require only sample access to the channel and can be trained without an explicit channel model. Additionally, NPDs provide mutual information (MI) estimates that can be used to optimize input distributions and code design. We demonstrate the effectiveness of NPDs on both synthetic deletion and IDS channels. For deletion channels, we show that NPDs achieve near-optimal decoding performance and accurate MI estimation, with significantly lower complexity than trellis-based decoders. We also provide numerical estimates of the channel capacity for the deletion channel. We extend our evaluation to realistic DNA storage settings, including channels with multiple noisy reads and real-world Nanopore sequencing data. Our results show that NPDs match or surpass the performance of existing methods while using significantly fewer parameters than the state-of-the-art. These findings highlight the promise of NPDs for robust and efficient decoding in DNA data storage systems.

Translocation event detection from raw nanopore current signals is a fundamental step in nanopore signal analysis. Traditional data analysis methods rely on user-defined parameters to extract event information, making the interpretation of experimental results sensitive to parameter choice. While Machine Learning (ML) has seen widespread adoption across various scientific fields, its potential remains underexplored in solid-state nanopore research. In this work, we introduce a nanopore signal generator capable of producing extensive synthetic datasets for machine learning applications and benchmarking nanopore signal analysis platforms. Using this generator, we train deep learning models to detect translocation events directly from raw signals, achieving over 99% true event detection with minimal false positives.